This page contains information on incentives for heat pumps—air-source and ground-source (aka “geothermal”)—, for wood and pellet stoves, as well as information on financing options.
HEAT PUMPS
Air-source heat pumps:
NYSEG offers a $800/10,000 BTU rebate for systems that heat a whole home; increasing to $1,000/10,000 BTUs if the heat pump system has integrated controls with the fossil fuel system; or $1,200/10,000 BTUs if the fossil fuel system is decommissioned.
The municipal electric Independent Energy Efficiency Program (IEEP) provides $1,200 for a whole-home system and $800 for a partial system.
In addition, grant funding from NYSERDA’s EmPower+ program can sometimes be used towards heat pump installations. This program is for income-eligible households. The Inflation Reduction Act recently provided more funds to the EmPower+ program, giving qualifying residents access to up to $24,000 in assistance. Eligible improvements include upgrades to energy-efficient heating systems like heat pumps.
As of January 2023, there is a 30% federal tax credit for air-source heat pumps and heat pump water heaters for up to $2,000. Learn more here and here.
Income-eligible households in some counties may qualify for an additional grant through the Finger Lakes Climate Fund, including significant incentives for income-eligible renters.
Lansing area residents may also qualify for additional incentives through a NYSEG-funded program (administered by Earth Sensitive Solutions)
Ground-source heat pumps, also known as geothermal, remove heat from underground, and are more efficient than air source heat pumps.
There are three (!) significant incentives for geothermal heat pumps which can cover over half the cost of the installation:
NYSEG rebate of $1,500/10,000 BTU for geothermal technologies.
Federal tax credit of 30% (raised up from 26% in 2022 with the Inflation Reduction Act). Learn more here and here.
State tax credit of 25% up to $5,000 (beginning in January 2022).
WOOD & WOOD PELLETS
As of 2023, there is a 30% federal tax credit for wood and pellet stoves with a thermal efficiency rating of 75% or higher.
There are also some incentives for replacement wood or pellet stoves for income-eligible households through NYSERDA’s EmPower+ program.
Furnaces and Boilers
As of April 2024, NYSEG natural gas customers can access rebates through NYSEG for purchases or tune-ups of furnaces and boilers.
FINANCING
In addition to the rebates mentioned above, there are a number of financing options to help pay for energy-related improvements. Contractors and our Community Energy Advisors can provide additional information on these options, but we provide an overview below.
On-Bill Recovery Loan
The On-Bill Recovery Loan is a NYSERDA loan in which your loan payments are built right into your utility bill. With this loan, your monthly payments may not exceed your estimated average monthly energy cost savings. So your energy savings essentially pay for your work. Loan amounts of $1,500-$25,000 with terms of 5, 10, or 15 years. Rates are 3.49% to 3.99% for low-income households, 4.99% for households with moderate income, and 6.99% or 7.49% for everyone else.
Smart Energy Loan
The Smart Energy Loan is another NYSERDA loan is more traditional, with a monthly payment to NYSERDA's loan servicer. Amounts are from $1,500-$25,000 with terms of 5, 10, and 15 years. Rates range from 3.49% for lower income households who pay by auto payment to 7.49% for upper income households who pay by check.
Other Financing Options & Local Banks
Your contractor may be able to offer you other financing options. And you may also want to consider a loan through a local bank. Home equity loans can often be useful for energy-related improvements. Some banks even offer special loans for energy projects which you can take advantage of.